Features
DMV Versa Is Designed For Inserting And Removing Scleral Contact Lenses.
Removal - Moisten The Suction Cup (Smaller End) Of the DMV Versa With Saline Solution, Guide It To The Eye And Place It Onto The Front Of The Scleral Contact Lens Near The Edge. Slowly Pull The Lens Away From The Eye. This Action Will Loosen The Adherence Of The Lens And The Lens Will Come Free From The Eye. After Removal, Carefully Slide The Contact Lens Sideways From The Suction Cup.
Insertion - Place A Wet Scleral Lens Onto The Large End Of The Versa Where The Lens Will Lightly Adhere. Hold The Eye Lids Open With The Other Hand And Place The Scleral Contact Lens On The Eye. Once The Lens Had Adhered To The Eye, Withdraw The DMV Versa. The Ribs In The Cup Are Designed To Provide An Elevated Surface For The Lens To Rest On And Prevent The Lens From Sticking To The Versa. Use A Mirror For Guidance.
Cleaning - Each Time After Using The DMV Versa Clean It With 70% Isopropyl Alcohol And Allow To Air Dry, Then Store The Device In Its Case. Plan To Replace It Every Six Months.
Precaution: If The DMV Versa Would Accidentally Become Attached To The Eye With The Small End (Suction Cup), Slide It To The Corner Of The Eye And Remove It By Turning. If The DMV Versa Become Attached To The Eye With The Large End (Resting Pad), Merely Withdraw It From The Eye, As There Is No Suction On This End.
Details
The DMV Versa Remover and Inserter is the ultimate tool for anyone wearing scleral contact lenses. Designed with convenience in mind, this device allows you to effortlessly insert and remove your lenses with ease. No more struggling or fumbling with your lenses - the DMV Versa is here to make your life easier.
Removing your lenses is now a breeze with the DMV Versa. Simply moisten the suction cup with saline solution, guide it to your eye, and place it onto the front of the lens near the edge. Slowly pull the lens away, and watch as it effortlessly comes free from your eye. No more discomfort or hassle - enjoy a pain-free lens removal experience.
Inserting your lenses has never been easier. With the DMV Versa, you can securely place your wet scleral lens onto the large end of the device. The lens will lightly adhere to the Versa, allowing you to hold your eyelids open with one hand and place the lens on your eye with the other. Once the lens has adhered to your eye, simply withdraw the DMV Versa. The ribs in the cup are specially designed to prevent the lens from sticking and provide a comfortable surface for the lens to rest on.
Cleaning the DMV Versa is a breeze as well. After each use, simply clean it with 70% isopropyl alcohol and allow it to air dry. Once dry, store it in its case to keep it safe and protected. And remember, it's important to replace your DMV Versa every six months to ensure optimal performance.
Experience the convenience and ease of the DMV Versa Remover and Inserter for scleral contact lenses. Don't waste any more time struggling with your lenses - get the DMV Versa today and enjoy a pain-free contact lens experience like never before.
Ready to revolutionize your contact lens routine? Get your DMV Versa Remover and Inserter now by clicking here!
Discover More Best Sellers in Contact Lens Care
Shop Contact Lens Care
$13.49


$28.99


$12.99


$24.99


$27.99


$6.99


$6.99


$13.99
